The system broadcast control desktop microphone adopts the operation mode of full touch buttons. The 10.1-inch 1280*800 resolution IPS LCD screen can perfectly display the image effect of the monitoring screen. The management center operating system adopts the embedded system to avoid virus invasion and increase the stability of the system operation. Sexual operation is more intuitive than the operation of a computer and the operation of a desktop microphone on a conventional broadcasting system.
Call function
A one-touch or two-button call mode can be used to specify a specific call destination. A full two-way video hands-free call: After the call is connected, the full-duplex hands-free mode is used immediately, and the call with echo cancellation is performed.
IP direct call function: When the management center is not online, all devices will be automatically converted to the device terminal or host corresponding to the IP direct mode call, which effectively guarantees the stability and security of the system.
Interruption: High-level hosts can intervene in the low-level hosts and extensions in the call.
Multi-party video call
Conference mode: Voice conference between host and terminal, video conference between host and host
HD video intercom
The video call adopts 720P resolution, which can clearly identify the face of the caller. The terminal intercom can connect with NVR and other storage devices to achieve 24-hour recording and recording.
Hosting
When the regional host's staff leaves or disconnects from the network, the system will automatically host the terminal extensions managed by all the regional hosts to other hosts for management, effectively preventing the occurrence of host abnormalities and unattended alarms.
5. Call transfer
Call transfer can be set to busy transfer, drop transfer, no response transfer, transfer by time period, etc.
Status prompt
On the page of the paging host, the online status and working status of real-time extensions of all terminals in the jurisdiction are visually displayed, which facilitates debugging, maintenance and maintenance. Each road button can add the location description information of the network to facilitate management and operation.
Public broadcasting
Regional broadcast: The paging host can perform MP3 file broadcast, call broadcast, and external audio broadcast on the managed terminal devices.
Zone broadcast: The paging host can perform MP3 file broadcast and call broadcast on the managed terminal device partition.
Scheduled broadcast: The paging host has a regular broadcast function; during the frequent occurrence of fraud cases, it can automatically play voice at the self-service bank to remind customers to guard against fraud.
Fire Radio: The paging host can use MP3 files for fire alarm sounds. When a fire alarm occurs, it automatically cuts to the maximum volume.
On demand control
When the device is in the same local area network as the mobile phone or the smart terminal, the control password may be directly input without on-demand song or teaching audio file directly connected to the terminal device through the management center.
9 .Insert files
The paging host can insert pre-recorded audio files to the terminal extensions in the call, which can be used to guide the customer service processing procedures and operation procedures.
10. Remote Access Control IO Control
Remote control: The system can use remote intercom to open the door and turn on the light at the remote place by authorized personnel. It can also realize other remote control with IO interface device or RS-485 interface.
11. Digital audio and video recording
The system's recording and recording of all terminals can be kept in the paging host, and can be retrieved or uploaded to the storage server in various ways such as time slots, extension numbers, etc.
The paging host can arbitrarily select the terminal extension to perform or loop over all terminal extensions (the length of each pause can be set, the default is 5 seconds).
Tri-color light status prompt
When an emergency call occurs, the entrance status light prompts different colors according to different call states, which helps the user to know the situation in time and quickly locate the call target.
14. Electronic map function: It supports customers to import scalar maps or engineering drawings and freely edit the detailed position and name parameters of the equipment. When an alarm occurs, the map will automatically set the position to the corresponding position of the alarm, and the customer's operation is simple and convenient.
